We all know that sound. The water constantly running because your toilet won't shut off. How do you stop a running toilet? Actually it is pretty simple once you know what you are doing. So don't let that annoyance bother you anymore. We are going to fix that problem for years to come and it will only take about 10 minutes. Ready to get going?

Most good trustworthy plumber will recommend replacing a gate valve regardless of its condition. The time to discover if it will work is not during a flood in your bathroom. If you have it replaced with a ball valve then check your water heater and laundry valves, too. Have them replaced at the same time with premium ball valves. Ball valve laundry bibbs make it easy to shut off the water to the washer after each use which may help to prevent floods in the future.

The repair of a ballcock tube is the simplest repair of all toilet leaks. There is a small black tube that is in the tank of the toilet that connects to the flush valve fill tube. If the tube slips from the little clasp that holds it in place, it can begin spraying water line repair in the tank and out from under the tank cover. To fix this toilet leak, simple re-attach the black tube to the clip. It really is that simple.



After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.

10) Tighten down the closet bolts making sure NOT to use too much torque. You aren't installing tires on a race car here so, take it easy Mr. Goodwrench. You just want to hold the toilet in place, not crack the porcelain base of the toilet or damage the drain flange.

Plumbers, like all other companies, are required to be on time and act professional. If they have called before hand to notify you then, this can be overlooked. However, if they turn up without apologising for being late, then they may not be the right plumber for you. Remember first water line repair impressions are everything. If they lack a good first impression then this may indicate that it is going to have an impression on their work. In most cases, you would have taken the time off work for the plumber, and what can be worse than waiting all day waiting for them to arrive?

The work area should always be clean and free of trash and clutter. The cleaner and less clutter there is in a Plumbers' work area, the better able a plumber will be to make sure that his job goes as smoothly as possible.

Plumbers can help keep small problems from becoming large problems. Do your homework before choosing a plumber and you can help to ensure that the job is done correctly and for a good competitive price.